Can I Use 5w40 Instead Of 5w30?

Is it OK to mix 5w30 with 5w40?

Oil 5W30 and 5W40 can be mixed.

For example, if you have a sharp drop in liquid level on your way and there is no 5W40 synthetic supply, but there is a similar liquid with the same label and markings, but from an outside producer, in this case 5W30 oil from your manufacturer will help you..

Can I put 5w 40 oil in my car?

To answer your question: No, going to a 5w-40 version of an approved oil for your engine isn’t going to hurt your engine under normal driving conditions. Your 5w-30 oil might break down more quickly if you regularly drive in temps above 35C. There is a second rating on your oil container that is important.

Is 5w30 good for old cars?

In general thinner oils flow faster and lubricate better, and keep the engine parts cooler. using a thicker oil is asking for trouble. So if your original specification calls for 5W30, I wouldn’t change it. … It protects the engine due to lower levels of friction.

What does 5w 30 oil mean?

multigrade oil5W-30 means that this is a multigrade oil. This is indicated by the two numbers separated by a “W” 5W – shows thickness/viscosity of the oil on a start-up – when you start the car (W – stands for Winter, this indicates oil performance under colder engine temperatures when the engine has not been running)

Can I use any 5w30 oil in my car?

If your car takes 5w30 oil and you put 5w30 oil in it, it’ll be fine. Totally wrong, these days the spec compliance of an oil is often more important than the viscosity. Don’t put any 5w30 in, put the correct 5w30 in.

Can you mix different brands of 5w30 oil?

Can you mix different 5w30 oils? Yes, you will be fine so along as the viscosity grade of the two oils are the same (e.g. 5W-30 and 5W-30). Never mix 5W-30 and say 10-40.

What oil is thicker 5w30 or 5w40?

Viscosity The working viscosity of 5w30 is basically from 9.3 to 12.5mm2/s whereas the operating viscosity of 5w40 is 12.5 to 16.3mm2/s. That means 5w40 has larger viscosity than 5w30.

Does brand of oil matter?

No. Switching brands is not harmful to your engine as long as you choose an oil marked with the API donut of the same level, e.g., API SN. Motor oil manufacturers must meet minimum industry standards for performance and compatibility of the API mark.

What happens if you put 10w40 instead of 5w30?

If you use 10-w-40 instead of 5-w-30 specified by the manufacturer then the viscosity of 10-w-40 used by you will be higher and oil thicker than what is specified during winters. Similarly the oil viscosity will be higher and oil thicker than specified during summers.

What happens if I put 10w 30 instead of 5w 30?

Your oil is a little thicker when cold. No damage will happen. … The 5W and 10W defines how the oil will flow at 0 degrees. At operating temperature, there will be a completely insignificant difference between the two.

What is 5w 40 oil used for?

Ideal for starting engines at low temperatures and effective at high engine temperatures, 5w40 engine oils can be used in most conditions.

Is it OK to mix different brands of oil?

Even if two different brands of oil have the same viscosity, you still should not be mixing them together. … Technically, using a grade of oil that’s recommended by your car manufacturer is correct. However, if you combine two different brands of motor oil, you could be at risk of damage.

What happens if you mix 5w20 with 5w30?

You can mix a 5W20 with a 5W30 oil with minimal amount of issues provided it the same manufacturer and the same API classification. The question is ‘why would you?” If it is because you oil is low and the only thing available is a different grade then it might be fine until you can get it changed.

Which oil is thicker 5w40 or 10w40?

The 5W40 is thinner than the 10W40 at lower temperatures. But when the temperature is higher, both motor oils similarly perform their intended functions (using the same viscosity). … On the other hand, the 10W40 motor oils are thicker than the 5W40 oils for good reasons.

What can I use instead of 5w30?

A 10w30 oil tends to move slower than a 5w30 oil during cold startups. This is perhaps the major difference between these two oils. Both oils have the same viscosity with is 30, at operating temperatures.

Is it okay to mix 5w30 with 10w40?

As posted above, mixing 5w30 with 10w40 will give you an oil that performs somewhat better in the cold than 10w40, but less good cold than 5w30, and that has a viscosity a bit higher than 5w30 but a bit lower than 10w40. … Mixing different oils will not improve the performance or efficiency of the engine in any way.

What happens if I use the wrong oil?

The brand of motor oil matters little, but its viscosity grade (10W-30, for example) is important. Use only what the owner’s manual specifies. Using the wrong oil can lead to reduced lubrication and shorter engine life. If the manual says to use synthetic oil, do so.