Does It Matter What 5w30 Oil I Use?

Can I use 10w 20 instead of 5w30?

Mixing different weights of oil is completely fine, it is the mixing of brands that really give you some problems.

The only issue that you might have with putting the lighter weight oil in your engine is if you have oil leaks they will be more active than with the thicker oil..

What happens if you mix 5w20 with 5w30?

You can mix a 5W20 with a 5W30 oil with minimal amount of issues provided it the same manufacturer and the same API classification. … I would suggest just getting the oil changed.

Can you switch from 5w20 to 5w30?

On a vehicle engine with 5W20 printed on the oil fill cap…. If the engine was originally designed to run 5w-30 then make the switch immediately.

Is Thicker oil better for high mileage cars?

The slightly thicker oil film from the heavier base weight oil — 10W — can help protect worn engine bearings as well. As long as you’re not hearing knocking or serious mechanical noises from the engine, the heavier oil should buy you many more miles of service from your vehicle.

Can I put 10w40 in a 5w30 engine?

The recommended oil viscosity for your vehicle, according to Kia documentation, is 10W-40. If you drive the vehicle in exceptionally cold weather, well below 32 degrees, you can use 5W-30 oil but even 10W-40 is still perfectly OK to use if outdoor temperatures are below freezing.

Is high mileage oil the same as synthetic blend?

High Mileage Oil: Vehicles are lasting longer, and more than 2/3 of the cars on the road have more than 75,000 miles on them. … Synthetic Blend: Like the name suggests, synthetic blend oils split the difference between conventional and synthetic, both in protection and price point.

Does it matter if you put different oil in your car?

The brand of motor oil matters little, but its viscosity grade (10W-30, for example) is important. Use only what the owner’s manual specifies. Using the wrong oil can lead to reduced lubrication and shorter engine life. If the manual says to use synthetic oil, do so.

What happens if you put 10w40 instead of 5w30?

If you use 10-w-40 instead of 5-w-30 specified by the manufacturer then the viscosity of 10-w-40 used by you will be higher and oil thicker than what is specified during winters. Similarly the oil viscosity will be higher and oil thicker than specified during summers.

What happens if I use 0w20 instead of 5w30?

0w-20 is simply a different viscosity of oil. It won’t be an advantage to your engine if your manufacturer suggests you use 5w-30 and may indeed be a detriment to your engine. … I would suggest using a viscosity for your engine that your manufacturer recommends. You can find that recommendation in your owner’s manual.

What happens if I use 5w40 instead of 5w30?

Takeaway. If you are racking your brain to choose between 5w30 and 5w40, we recommend you go with 5w30. However, if it is too expensive or not available for use, you can always go with the 5w40, which is just as good and will not cause any damage to the engine parts.

Can you mix different brands of 5w30 oil?

THE ANSWER IS NO! Even if two different brands of oil have the same viscosity, you still should not be mixing them together. … Technically, using a grade of oil that’s recommended by your car manufacturer is correct.

Can I use 5w20 instead of 5w30 Toyota?

Probably not. 5w20 oil is fairly light oil and is generally designed to work with newer engines. Motor oil has become part of a manufacturers program to allow engines to get higher fuel mileage. Lighter oils take less HP to pump through an engine than heavier oils.

Which is better 5w 20 or 5w 30?

The key difference between 5W20 and 5W30 motor oil is that the former is thicker or less viscous. … The more viscous motor oil is, the better it will be able to resist the heat and not break down. In this case, 5w30 oil will provide better overall engine protection than 5w20.

Does it matter if you use 10w30 instead of 5w30?

Both 5w30 and 10w30 engine oils have a similar SAE rating, meaning that they will perform the same at high or operating temperatures. The digits 30 indicate the viscosity of the oils when in high temperatures. 10w30, however, will thicken more when in a cold climate. 5w30 is much suitable during the cold season.

Does it matter if I use 5w30 instead of 5w20?

Due to the increased resistance of the thicker 5W-30 oil, your engine will produce slightly lower fuel economy and horsepower output. You also risk engine damage when using 5W-30 instead of 5W-20, as the internal engine components are specifically designed to be used with 5W-20 motor oil.

What oil is thicker 5w30 or 10w40?

A 10w-40 motor oil is a thicker oil at startup than a 5w-30 motor oil. Therefore, 10w-40 oil clings to the engine’s moving parts more than the lower viscosity 5w-30 oil.

Does brand of oil matter?

No. Switching brands is not harmful to your engine as long as you choose an oil marked with the API donut of the same level, e.g., API SN. … You may give up enhanced performance if you switch from synthetic or high mileage to conventional oil. MYTH: When motor oil becomes dark, that means it’s time to change it.

Can I use any 5w30 oil in my car?

Posts: 155,871. If your car takes 5w30 oil and you put 5w30 oil in it, it’ll be fine. Totally wrong, these days the spec compliance of an oil is often more important than the viscosity. Don’t put any 5w30 in, put the correct 5w30 in.

Can you mix 5w30 and 0w20?

It won’t be a problem, though if you are under warranty they might ask for proof of proper oil changes (should something ever happen). Mixing 0w20 and 5w30 will typically give you a heavy 20-weight or light 30-weight.

Can you mix 5w30 and 10w30?

Yes, if topping up. If your oil must be topped up, then you are burning oil already, so the difference won’t cause more damage than is already there. 5W30 and 10W30 are essentially the same at operating temperature. It is only for cold weather starting that the performance will be different.

What happens if you put 5w20 instead of 0w 20?

Both 5w-20 and 0w-20 are IDENTICAL once the car is up to temperature. The difference is how thin those oils are when the car is cold. Neither the 0w or the 5w flow enough in the cold to properly lubricate your engine. However, the 0W is thinner and does LESS damage at start up than the 5W oil.