Question: What Happens If I Use 10w40 Instead Of 10w30?

Is it OK to use 10w40 instead of 10w30?

Overall the 10W30 will be the more appropriate oil for cold weather and non-performing engines while 10W40 is perfect for warmer temperatures and older vehicles.

But, if you are still not sure what to use, talk to your local mechanic or check the vehicle’s manual..

What does 10w 40 mean in oil?

The lower the “W” number the better the oil’s cold temperature/cold start performance. The 40 in a 10w-40 simply means that the oil must fall within certain viscosity limits at 100°C. … Once again the lower the number, the thinner the oil: a 30 oil is thinner than a 40 oil at 100°C etc.

Is it OK to use 10w40 instead of 5w20?

You can let it cool off enough so you do not burn yourself.. but keep it near hot does the best. And a 10W40 would invalidate your warranty… just so you know. In a 5W20 engine. You could use a 0W20 oil (I use 0W20 oil) in cold weather and it would be Ok by Ford.

Is 10w40 good for high mileage?

A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. The slightly thicker oil film from the heavier base weight oil – 10W – can help protect worn engine bearings as well.

For Example: 10W30 When you start a cold engine up again, motor oil needs to travel to the top of the engine, where it trickles back down. Since motor oil is vital to lubricating your engine, it needs to move quickly and low viscosity helps it do just that.

Is 10w40 good for winter?

With an oil like a 10W40 (the W stands for winter), the oil flows similar to a 10-weight in freezing temperatures to minus 30 C and protects like a 40-weight at 100 C. With this innovation in oil performance, changing weights for the season is no longer necessary and may be detrimental.

What is the best engine oil for high mileage?

5 Best Motor Oils for High Mileage Engines#1 – Mobile 1 High Mileage Synthetic Oil.#2 – Royal Purple HMX Synthetic Oil.#3 – Mobile Super High Mileage Synthetic Oil.#4 – Castrol GTX High Mileage Synthetic Blend Oil.#5 – Pennzoil High Mileage Synthetic Blend Motor Oil.

When should I use 10w40 oil?

When to Use 10w30 vs 10w40 Using 10w30 oil in cold weather will help reduce excessive oil temperatures and drag as the engine warms up. Using 10w40 oil in the summer will help the oil stick to internal components in high temperatures, avoiding the wear and tear from metal-to-metal contact between moving parts.

Will using thicker oil stop burning?

A lot of oil-burning takes place because an engine’s piston rings are worn out, and thicker oil won’t fix that. Using thicker oil is also a particularly bad solution for modern cars. … They use low-viscosity oils that splash easily all over the moving parts of the engine to make sure they’re all lubricated.

Is Thicker oil better for older engines?

Viscosity, or how well an oil flows or doesn’t flow, is an important part of oil selection. Newer vehicles can utilize thinner oils for faster lubrication of new engine parts. In contrast, older, high-mileage engines benefit from thicker oils to prevent friction and oil loss.

What does 10w 30 stand for?

The 10W30 designation on engine oil means that the viscosity of the oil is rated at 10W when an engine is cold and 30 when the engine is hot. This is different than an oil labeled 5W30, which has a thinner viscosity when the engine is cold at 5W.

Will the wrong oil damage my engine?

The brand of motor oil matters little, but its viscosity grade (10W-30, for example) is important. Use only what the owner’s manual specifies. Using the wrong oil can lead to reduced lubrication and shorter engine life. If the manual says to use synthetic oil, do so.

What are the disadvantages of synthetic oil?

Disadvantages of Synthetic Motor OilMany of the synthetic oil blends reduce friction better than conventional motor oil. … Synthetic oil does not hold lead in the suspension of the oil. … Problems with racecar type engines using roller lifters. … Synthetic oil has different disposal methods.More items…•

Which is better 10w 30 or 10w 40?

The difference between 10W-30 and a 10W-40 is the high temperature viscosity. Obviously, a 10W-40 is thicker than a 10W-30 at high temperature. … Using the correct viscosity oil eases starting, reduces friction and slows wear.

Does 10w30 hurt 5w20 engine?

Modern cars are designed to use lower viscosity oil ranges, so they can properly lubricate ( see attachment) Going from 5w-20 to 10w-30 should cause no harm for one oil change. But if you engine as designed for 5W-20, give it 5W-20.

What happens if you put thicker oil in your car?

Not only that, but the engine will waste energy pumping the thicker motor oil, reducing fuel economy. Since thicker oils don’t transfer heat as well as thinner oils, operating temperatures will increase, too, possibly leading to accelerated chemical break down and harmful sludge and deposits.

Which oil is thicker 5w30 or 10w40?

A 10w-40 motor oil is a thicker oil at startup than a 5w-30 motor oil. Therefore, 10w-40 oil clings to the engine’s moving parts more than the lower viscosity 5w-30 oil.

What is the best oil for older engines?

Standard Rotella comes in a heavier 15W-40 blend. Another choice – in a full synthetic – is Amsoil which carries a line of oils with ZDDP in popular viscosities such as 10W-40 and heavier 20W-50. Redline oil is also still fine for older engines with flat tappet cams.