Question: When Should I Use 10w 40 Oil?

Is mixing 5w30 with 10w30 bad?

Yes, if topping up.

If your oil must be topped up, then you are burning oil already, so the difference won’t cause more damage than is already there.

5W30 and 10W30 are essentially the same at operating temperature.

It is only for cold weather starting that the performance will be different..

What happens if I use 10w40 instead of 10w30?

Using 10w30 oil in cold weather will help reduce excessive oil temperatures and drag as the engine warms up. Using 10w40 oil in the summer will help the oil stick to internal components in high temperatures, avoiding the wear and tear from metal-to-metal contact between moving parts.

Can I use 10w 40 instead of 5w40?

10w40 is thicker than 5w40, ONLY when cold. At operating temperature it is exactly the same. … Multi-viscosity oils with a lower W number are specifically designed to flow better, and thus lubricate better, at very low temperatures. There is no need to use a 5w-40 if the vehicle only requires 10w-40.

Can I mix 20w50 with 10w40?

Re: 20w50 and 10w40 mix The filter holds a good amount of oil, so yes, you will be mixing two different grades of oil which can lead to it congealing and cacking up all your oil ways.

Which oil is better 10w30 or 10w40?

Since the cold temperature viscosity rating is the same at ’10W’, we can safely assume that these two motor oils will be able to resist becoming solid at a temperature of zero degrees Fahrenheit. … In very simple words, the 10W40 oil is thicker than the 10W30 oil.

What happens if you use 10w40 instead of 5w30?

If you use 10-w-40 instead of 5-w-30 specified by the manufacturer then the viscosity of 10-w-40 used by you will be higher and oil thicker than what is specified during winters. Similarly the oil viscosity will be higher and oil thicker than specified during summers.

Is 10w 40 oil good?

Using the correct viscosity oil eases starting, reduces friction, and slows wear. For even more effective start-up protection, use a synthetic 10W-40 instead of a conventional 20W-50. The synthetic 10W-40 flows easily and still maintains enough viscosity to protect piston skirts and bearings when it gets hot.

Which is better 10w40 or 20w50?

the huge problem is the other number though. The smaller number, (the 20 part of 20w-50) describes how the oil behaves at 40 deg C and a 20w at 40 deg C is about 10 times thicker than your engine wants. A 10w-40 is better at around 6 times thicker and a 0w-40 is much better at about 4 times thicker.

What is 20w 50 oil used for?

A 20W-50 motor oil is typically used in older vehicles or in particularly warm climates. Castrol GTX 20W-50 has been specially formulated to help extend the life of your engine by keeping it free from sludge, even when operating in extremely high temperatures.

What does 10w 40 mean in oil?

In a 10w-40 for example the 10w bit (W = winter, not weight or watt or anything else for that matter) simply means that the oil must have a certain maximum viscosity/flow at low temperature. … The 40 in a 10w-40 simply means that the oil must fall within certain viscosity limits at 100°C.

Which oil is thicker 5w30 or 10w40?

A 10w-40 motor oil is a thicker oil at startup than a 5w-30 motor oil. Therefore, 10w-40 oil clings to the engine’s moving parts more than the lower viscosity 5w-30 oil.

Is it OK to mix engine oils?

Mixing Motor Oil According to Mobil Oil, it should be fine to mix oils. … Many oils are a blend of natural and synthetic oils. So, if you are low on oil, don’t be afraid to add a quart or two of synthetic oil if you are using regular oil or even regular oil if you are using a synthetic.

Is 20w50 good for high mileage?

Ideally, this oil is used on high-mileage vehicles in climates that experience winters of 5 degrees Celsius (41 degrees Fahrenheit). This oil is reliable for cold engine start-up but may be less reliable for climates that experience freezing temperatures.

Is Thicker oil better for older engines?

A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. The slightly thicker oil film from the heavier base weight oil — 10W — can help protect worn engine bearings as well.

Can you mix 10w30 and 10/40 oil?

You will be fine with that. They will mix right in with each other and no harm will be done. Even if you were to mix syn with conventional you’ll be fine. If you were to labratory test your oil it will read out as not a true 10w-30 but no harm will be done.

What is the difference between 10w 40 and 15w 40 oil?

Viscosity or thickness of the oil increases with rise in temperature. A 10W40 oil will be thicker in the cold than 15W40 oil, but they will have the same viscosities at higher temperatures. The winter viscosity number dictates cold-start performance. … 10W40 oil will perform cold starts better than 15W40 oil.

For Example: 10W30 When you start a cold engine up again, motor oil needs to travel to the top of the engine, where it trickles back down. Since motor oil is vital to lubricating your engine, it needs to move quickly and low viscosity helps it do just that.

Can you mix synthetic oil with regular oil?

The short answer is… yes. If you don’t have a choice, adding synthetic oil to regular oil can help you out in a pinch.

What oil is thicker than 10w40?

The difference between 10w30 and 10w40 is the thickness of the oil at operating/high temperatures, at which 10w40 is thicker than 10w30.

Will thicker oil damage my engine?

Not only that, but the engine will waste energy pumping the thicker motor oil, reducing fuel economy. Since thicker oils don’t transfer heat as well as thinner oils, operating temperatures will increase, too, possibly leading to accelerated chemical break down and harmful sludge and deposits.

Can I mix 5w30 with 10w40?

As posted above, mixing 5w30 with 10w40 will give you an oil that performs somewhat better in the cold than 10w40, but less good cold than 5w30, and that has a viscosity a bit higher than 5w30 but a bit lower than 10w40.

When should I use 20w 50 oil?

Warmer Temperatures 20W50 motor oil is suitable for warmer climates, where the higher temperature causes the oil to thin. It is also useful for vehicles subject to hot temperatures and for those used for high-stress activities such as hauling or pulling trailers.

What oil is best for older engines?

When you’re choosing the best oil for older cars or high mileage engines, there are several criteria you can look at.Pennzoil High Mileage Conventional Motor Oil. … Castrol GTX Part-Synthetic High Mileage. … Valvoline MaxLife High Mileage Synthetic Blend. … Mobil1 High Mileage Engine Oil. … Amsoil Premium Protection Motor Oil.More items…•