Quick Answer: Can I Mix 5w30 And 10w40?

Can you mix 2 different brands of oil?

Even if two different brands of oil have the same viscosity, you still should not be mixing them together.

Technically, using a grade of oil that’s recommended by your car manufacturer is correct.

However, if you combine two different brands of motor oil, you could be at risk of damage..

Is Thicker oil better for high mileage cars?

A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. The slightly thicker oil film from the heavier base weight oil – 10W – can help protect worn engine bearings as well.

What type of oil is best for high mileage cars?

Some mechanics recommend switching to a thicker (higher viscosity) oil — such as 10W-30 full synthetic oil instead of 5W-20 full synthetic — or using oil additives to stop leaks.

Can I use any 5w30 oil in my car?

If your car takes 5w30 oil and you put 5w30 oil in it, it’ll be fine. Totally wrong, these days the spec compliance of an oil is often more important than the viscosity. Don’t put any 5w30 in, put the correct 5w30 in.

What happens if you put the wrong oil in a car?

You might notice a few oil spot in your garage or under your car because using the wrong oil can lead to leaks, or you might become aware of a burning smell while driving. If the oil isn’t working as it should engine parts might not be lubricated well enough and cause friction, which can burn the oil.

Is 5w30 better than 10w40?

The main difference between the 5w30 and 10w40 is the viscosity difference at different temperatures. … The one, 5w30, will be able to flow better when the temperatures are low than the 10w40. So at a lower temperature, the 5w30 oil will be the best to protect the engine.

When should I use 10w40 oil?

Overall the 10W30 will be the more appropriate oil for cold weather and non-performing engines while 10W40 is perfect for warmer temperatures and older vehicles.

What happens if you put thicker oil in your car?

Low efficiency. Using motor oil with higher viscosity (oil that is too thick) also reduces your car’s overall fuel efficiency. This is because the thicker the motor oil, the higher its resistance on vital metal components, such as pistons.

Is 20w50 good for high mileage?

The viscosity level of engine oil 20W50 is geared toward racing engines, as opposed to high-mileage engines, that run extremely hot and need heavy load operation. … Since its viscosity is so great, it can drag down the functioning of the crankshaft, resulting in less horsepower.

Does brand of oil matter?

No. Switching brands is not harmful to your engine as long as you choose an oil marked with the API donut of the same level, e.g., API SN. Motor oil manufacturers must meet minimum industry standards for performance and compatibility of the API mark.

Can I mix different motor oils?

The good news is that mixing different types of oil it will not harm your engine in any way in the short run. Most synthetic and semi-synthetic engine oils are based on regular oil and are compatible. … Now, as far as different grades are concerned, mixing between them isn’t something that will damage your engine either.

Can you mix different brands of 5w30 oil?

Can you mix different 5w30 oils? Yes, you will be fine so along as the viscosity grade of the two oils are the same (e.g. 5W-30 and 5W-30). Never mix 5W-30 and say 10-40.

Can you mix 0w20 and 5w30?

If you’re hoping to homebrew your own special blend of 2.5W-25 for a car you actually care about, I wouldn’t. Most cars that recommend 0W-20 or 5W-20 do so for fuel economy reasons and can use 5W-30 with no ill effects other than slightly reduced fuel economy, but check your owner’s manual to be sure.

What happens if you mix 5w20 with 5w30?

You can mix a 5W20 with a 5W30 oil with minimal amount of issues provided it the same manufacturer and the same API classification. The question is ‘why would you?” If it is because you oil is low and the only thing available is a different grade then it might be fine until you can get it changed.