Quick Answer: How Many Quarts Of Oil Does A Heritage Softail Take?

How often should you change primary oil in my Harley?

I just change it at 5000 miles together with motor oil for convenience or once a year regardless of the miles.

I change it whenever i change my engine oil.

I change my oil every 500-1000…

2500-3000…..

How much does an oil change on a Harley cost?

Service Pricing MenuINSPECTIONPRICE*OIL & FILTER CHANGEPRICE*Street [black filter only]$99.95Sportster$99.95Softail$99.955 more rows

How much oil does a Softail primary take?

Fill the primary chaincase with up to one quart of Harley-Davidson Formula+ Primary Chaincase Fluid. Ideally, the fluid level should be even with the bottom of the clutch assembly, as viewed through the clutch inspection port with the motorcycle in an upright position.

Do you check Harley oil on kickstand?

The transmission oil is checked with the motorcycle on a level surface and on the kickstand. … The transmission oil level is correct when between the Add and Full marks on the dipstick.

Does a Harley have transmission fluid?

Harley Davidson should certify the transmission fluid you use on your tranny. … For instance, you can use Red Line 42804 V-Twin transmission oil. The trans fluid ensures that you have a smooth shifting of gears.

Do you check Harley oil hot or cold?

On any of the Harley models(except V-rod) you always check the oil level on the Jiffy stand(aka kick stand), and yes I said it folks Jiffy stand. Whether your bike is hot or cold doesn’t matter because on the dipstick there are two readings, one level being the cold level which will be lower than the hot reading.

What is the best oil for Harley Davidson?

The Oils for Harley Davidson Motorcycles Reviews & Buyer’s Guide:AMSOIL VTWIN Oil Change KIT 20W50 Full Synthetic Motorcycle Oil 4QTS + Filter.Spectro Heavy Duty Platinum Full Synthetic 20w50 Case of 12x1qt.Silkolene 600868413 V-Twin Engine Oil – 20W50 – 4L.More items…

How much oil does a Softail take?

The Softail calls for three quarts of oil. Start with 2 1/2 quarts. It’s very important not to overfill the reservoir. Next, take the bike for a short ride to bring the engine to operating temperature.

What kind of oil should I use in my Harley Davidson?

SAE 20W50Harley-Davidson recommends SAE 20W50 viscosity grade oil for “all temperature conditions,” according to the Harley-Davidson website. The SAE 20W50 oil covers the biggest range of operating temperatures and is ideally used in ambient temperatures ranging from 60 to 80 degree Fahrenheit.

How much oil goes in a Harley transmission?

When filling the transmission, use Harley-Davidson TRANSMISSION LUBRICANT (Part No. 99892-84 (qt.) or 99891-84 (gal.)). The transmission fluid capacity is approximately 24 ounces (0.71 liters).

How much oil goes in a Harley primary?

Fill the primary with oil Harley Davidson Softails require one quart of primary fluid. Be sure to check your owner’s manual or the AMSOIL Product Guide for the correct primary oil capacity for your bike. Once you’ve filled the primary case with fluid, double check the fluid level visually.

Do you push dipstick all the way in to check oil?

Push the dipstick all the way down. Like another said, look at both sides of the stick. Whichever side shows the lowest oil line across the stick is the correct level.

Can I use gear oil in my Harley transmission?

Harley says that you can go 20,000 miles on the transmission fluid change if you use their Syn3. 10,000 on the primary chaincase. Amsoil recommends their 75W-110 gear lube for Harley big twin transmissions. It’s probably way overkill unless you like extended drain intervals.

Can you use motor oil in Harley primary?

You actually have a couple of choices for the primary drive. The optimum product would be Mobil 1 Racing™ 4T 10W-40 motorcycle oil, but it is also okay to use Mobil 1™ V-Twin 20W-50.