Quick Answer: How Much Oil Goes In A Harley Transmission?

Is Harley syn3 full synthetic?

TESTED-CERTIFIED for use in Harley-Davidson® engine, primary chaincase and transmission applications, Screamin’ Eagle® SYN3® Full Synthetic Lubricant makes changing and topping-off fluids a simple one-product process.

SYN3® lubricant can only be purchased at your local dealer..

How much oil does a Harley transmission take?

When filling the transmission, use Harley-Davidson TRANSMISSION LUBRICANT (Part No. 99892-84 (qt.) or 99891-84 (gal.)). The transmission fluid capacity is approximately 24 ounces (0.71 liters). Inspect o-ring for tears or damage.

What oil goes in a Harley transmission?

AMSOIL Offers Superior Protection And PerformanceAMSOIL Recommendations for Harley-Davidson MotorcyclesFlatheadBestSecondaryTransmission20W-50MVT Synthetic V-Twin Transmission FluidPrimary Chain Case20W-50MVP Synthetic V-Twin Primary FluidIronhead – Evolution Sportsters / V-RodsBestSecondary14 more rows

Is 50000 miles alot for a motorcycle?

A motorcycle engine with 40,000 to 50,000 miles is considered a high-mileage bike in some circles. But if this particular motorcycle has complete maintenance records, has no evidence of physical damage, and the engine has no oil leaks, then this is considered a good buy.

Can I use car oil in my Harley?

Although you can temporarily use motor oil, it may end up damaging your bike. If you want an oil to use in all weather conditions they recommend that you should use SAE 20W50. For low temperatures, Harley recommends SAE 10W40, which prevents low-temperature issues.

What oil does a Harley 103 take?

Silkolene V-TWIN 20W-50 High-Performance Motorcycle Oil is a classic mineral oil designed for all Harley Davidson engine formats, old and new. Since it’s mineral oil, there are no synthetic additives, as such, this is a basic refined crude oil. It protects a wide range of operating conditions.

What is the best oil for Harley Davidson?

List of Top-Rated Oils for Harley Davidson Motorcycles Comparison Table:Product NameTypeAMSOIL VTWIN Oil Change KIT 20W50 Full Synthetic Motorcycle Oil 4QTS + Filter20W50Spectro Heavy Duty Platinum Full Synthetic 20w50 Case of 12x1qt20W50Silkolene 600868413 V-Twin Engine Oil – 20W50 – 4L.20W502 more rows

Can you use ATF in Harley primary?

The viscosity in ATF generally is too low to recommend for using in the primary case. After reading a number of threads about ATF in the primary, I gave it a shot. I have run Harley’s primary / transmission fluid in the primary since I bought the bike, and to be honest, the bike has run just fine.

How do you check the oil level on a Harley Davidson primary?

Remove 5 derby cover retaining screws, stand bike up straight, lube level should just be touching the outside diameter of the clutch shell. Remove 5 derby cover retaining screws, stand bike up straight, lube level should just be touching the outside diameter of the clutch shell.

How much oil goes in a Harley primary?

Fill the primary with oil Harley Davidson Softails require one quart of primary fluid. Be sure to check your owner’s manual or the AMSOIL Product Guide for the correct primary oil capacity for your bike.

How do you check transmission fluid on a Harley?

To check the level, unscrew the dipstick with the hex bit and wipe off any oil, then reinstall/replace the dipstick to the point where only the O-ring makes contact with the transmission surface. Then unthread the dipstick and check the fluid level on it; the fluid should be in between the A and F marks.

Is amsoil better than Harley oil?

Not only does AMSOIL Synthetic Motorcycle Oil offer greater wear protection than Screamin’ Eagle® Synthetic Motorcycle Oil, it also delivers greater value. Suggested retail price of Screamin’ Eagle® is nearly $2 a quart higher than AMSOIL 20W-50 Motorcycle Oil.

Can I use Mobil 1 in my Harley?

Applications. Mobil 1 V-Twin 20W-50 is specifically recommended by ExxonMobil for lubrication of four-stroke motorcycle engines in high performance motorcycles. Recommended by ExxonMobil for use in Harley-Davidson.

How much oil does a Harley 103 transmission take?

A: ‘Dry’ fluid capacity is 22-24* fluid oz for all Evo and Twin Cam88/103 Harley 5-speed and BAKER 6-speed transmissions from 1980-2006 (*except 2006 Dyna). The 2006-up Dyna, 2007-up Softail & Touring (Cruise Drive factory 6-speed bikes) take a full quart of fluid (32 fluid oz).

What oil goes in a Harley primary?

You actually have a couple of choices for the primary drive. The optimum product would be Mobil 1 Racing™ 4T 10W-40 motorcycle oil, but it is also okay to use Mobil 1™ V-Twin 20W-50.

How often should I change the transmission oil in my Harley?

The owner’s manual tells you to change your engine oil every 5K miles, primary every 10K and transmission every 20K. Since you’re changing your engine oil at 3K miles, you should change the primary every 6K and the transmission every 12K.

Can I use gear oil in my Harley transmission?

Our answer: It is perfectly acceptable to use 75W-140 gear oil in Harley-Davidson transmissions. … For instance, AMSOIL V-Twin Synthetic Transmission Oil is an SAE 110 gear oil. Let’s discuss the pros and cons of going with 75W-140.