Quick Answer: Is It OK To Mix 5w And 10w Oil?

Is 10w oil better than 5w?

Automakers usually specify a 5W-20 or 5W-30 oil for colder temperatures, with a 10W-30 oil as optional for higher ambient temperatures.

These three ratings cover most light-duty vehicles on the road.

Even more important, though, is changing the oil and filter regularly..

Is it okay to mix 5w30 with 10w40?

As posted above, mixing 5w30 with 10w40 will give you an oil that performs somewhat better in the cold than 10w40, but less good cold than 5w30, and that has a viscosity a bit higher than 5w30 but a bit lower than 10w40. … Mixing different oils will not improve the performance or efficiency of the engine in any way.

Is it OK to mix different brands of oil?

Even if two different brands of oil have the same viscosity, you still should not be mixing them together. … Technically, using a grade of oil that’s recommended by your car manufacturer is correct. However, if you combine two different brands of motor oil, you could be at risk of damage.

Will the wrong oil damage my engine?

The brand of motor oil matters little, but its viscosity grade (10W-30, for example) is important. Use only what the owner’s manual specifies. Using the wrong oil can lead to reduced lubrication and shorter engine life. If the manual says to use synthetic oil, do so.

What happens if you put thicker oil in your car?

Not only that, but the engine will waste energy pumping the thicker motor oil, reducing fuel economy. Since thicker oils don’t transfer heat as well as thinner oils, operating temperatures will increase, too, possibly leading to accelerated chemical break down and harmful sludge and deposits.

When should I use 10w 30 oil?

At operating temperatures, both oils will have the same viscosity (30) and will flow and protect identically. If the oil will be in the engine during winter and you live in a place where it gets cold during these months, use 5w30 oil. If it will only be in the engine during the summer, use 10w30.

Should you put thicker oil in an older engine?

A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. The slightly thicker oil film from the heavier base weight oil — 10W — can help protect worn engine bearings as well.

Can you mix 5w 30 and 10w 30 oil?

Mixing different oils will not improve the performance or efficiency of the engine in any way. The additives in synthetic oil may have limited or no effect at all when mixed with a regular engine oil. … 5w30 and 10w30 are both 30 weight oils and the exact same thickness in your engine when it is at operating temperature.

What happens if you put 10w oil in 5w?

Your oil is a little thicker when cold. No damage will happen. … The 5W and 10W defines how the oil will flow at 0 degrees. At operating temperature, there will be a completely insignificant difference between the two.

Is it OK to mix engine oils?

The good news is that mixing different types of oil it will not harm your engine in any way in the short run. Most synthetic and semi-synthetic engine oils are based on regular oil and are compatible. … Now, as far as different grades are concerned, mixing between them isn’t something that will damage your engine either.

What happens if I put 10w40 instead of 5w30?

If you use 10-w-40 instead of 5-w-30 specified by the manufacturer then the viscosity of 10-w-40 used by you will be higher and oil thicker than what is specified during winters. Similarly the oil viscosity will be higher and oil thicker than specified during summers.

Will 10w 30 oil hurt a 5w30 engine?

Most oils will mix perfectly, provided they have a similar synthetic. Therefore, there is no problem in mixing 10w30 and 5w30 since one will be topping up. Mixing the viscosity of oils will not have any effect on the engine. 5w30 and 10w30 engine oils have close viscosity, and thus there is no harm in mixing them.

Is Thicker oil better for high mileage cars?

A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. The slightly thicker oil film from the heavier base weight oil – 10W – can help protect worn engine bearings as well.

What oil is thicker 5w30 or 10w40?

A 10w-40 motor oil is a thicker oil at startup than a 5w-30 motor oil. Therefore, 10w-40 oil clings to the engine’s moving parts more than the lower viscosity 5w-30 oil.

Can I mix synthetic and regular oil?

Yes. There is no danger mixing synthetic and conventional motor oil. However, conventional oil will detract from the superior performance of synthetic oil and reduce its benefits.