What Does 10w 30 Stand For?

Can I use 10w 40 instead of 10w30?

The difference between 10W-30 and a 10W-40 is the high temperature viscosity.

Obviously, a 10W-40 is thicker than a 10W-30 at high temperature.

Remember that using oil with a viscosity that is too high can result in excessive oil temperature and increased drag..

Is Synthetic Oil Better?

Synthetic oil is by far better for performance. It protects the engine due to lower levels of friction. Additives help clean the engine of deposits. And, fewer impurities mean it burns cleaner, thickens far more slowly, and has fewer deposits to start.

Which oil is best for high mileage engines?

5 Best Motor Oils for High Mileage Engines#1 – Mobile 1 High Mileage Synthetic Oil.#2 – Royal Purple HMX Synthetic Oil.#3 – Mobile Super High Mileage Synthetic Oil.#4 – Castrol GTX High Mileage Synthetic Blend Oil.#5 – Pennzoil High Mileage Synthetic Blend Motor Oil.

Can I use 10w 30 instead of 5w30?

Most oils will mix perfectly, provided they have a similar synthetic. Therefore, there is no problem in mixing 10w30 and 5w30 since one will be topping up. Mixing the viscosity of oils will not have any effect on the engine. 5w30 and 10w30 engine oils have close viscosity, and thus there is no harm in mixing them.

What is 10w 50 oil used for?

10W means that the oil is suitable for winter temperatures down to -30 °C. The second part of the SAE class, the number ’50’, indicates the kinematic viscosity at 100 °C. With the ADDINOL POLE POSITION 10W-50 this is in the range of 16.3 – 21.8 mm²/s and can therefore also be used in high-performance engines.

Does oil get thicker or thinner when hot?

Your engine needs oil that is thin enough for cold starts, and thick enough when the engine is hot. Since oil gets thinner when heated, and thicker when cooled, most of us use what are called multi-grade, or multi-viscosity oils.

Is SAE 10w 30 the same as 10w 30?

Nope. SAE 10W30 is an oil that has SAE 10W viscosity(thickness) at low temperatures, and SAE 30 viscosity at high temperatures. SAE 10W30 is an oil that has SAE 10W viscosity(thickness) at low temperatures, and SAE 30 viscosity at high temperatures.

What happens if you put 10w40 instead of 5w30?

If you use 10-w-40 instead of 5-w-30 specified by the manufacturer then the viscosity of 10-w-40 used by you will be higher and oil thicker than what is specified during winters. Similarly the oil viscosity will be higher and oil thicker than specified during summers.

Can you mix synthetic and regular oil?

The short answer is… yes. If you don’t have a choice, adding synthetic oil to regular oil can help you out in a pinch.

What does 10w40 mean?

The lower the “W” number the better the oil’s cold temperature/cold start performance. The 40 in a 10w-40 simply means that the oil must fall within certain viscosity limits at 100°C. … Once again the lower the number, the thinner the oil: a 30 oil is thinner than a 40 oil at 100°C etc.

Which oil is thicker 5w30 or 10w40?

A 10w-40 motor oil is a thicker oil at startup than a 5w-30 motor oil. Therefore, 10w-40 oil clings to the engine’s moving parts more than the lower viscosity 5w-30 oil.

Is 20w50 good for high mileage?

Considerations. The viscosity level of engine oil 20W50 is geared toward racing engines, as opposed to high-mileage engines, that run extremely hot and need heavy load operation. … Since its viscosity is so great, it can drag down the functioning of the crankshaft, resulting in less horsepower.

What does the W stand for in oil?

winterThe “W” stands for winter, not weight as many people think. The lower the number here, the less it thickens in the cold. So 5W-30 viscosity engine oil thickens less in the cold than a 10W-30, but more than a 0W-30.

Is Thicker oil better for high mileage cars?

A: Yes. This is a practical method to improve oil pressure in an older, high-mileage engine. The slightly thicker oil film from the heavier base weight oil – 10W – can help protect worn engine bearings as well.

Is 10w30 better for high mileage?

Both high mileage 5w30 and 10w30 engine oils have the same additives, the only difference is the viscosity at cold startups. Since both oils have the same operating temperature viscosity (30) and additives, they will perform exactly the same. However, 5w30 flows much better than 10w30 during cold starts.